Sander

Product Detail

 
This sander can sander solid wood board, plywood, joinery board, particleboard, fiberboard and pasted panel with fixed thickness and fine sanding, with large sanding quantity and high sanding accuracy.
Large amount of sanding, high sanding precision.
The processing quality is good, as long as the reasonable selection of sand mesh, satisfactory surface roughness and smoothness can be obtained.
High production efficiency, synchronous speed, high linear speed of sand belt, fast cutting speed of sand particles, sand cutting force increased by more than 30%.
The feed speed can be adjusted at will with frequency conversion, and the automatic thickness sensor can be installed to automatically adapt to the thickness of the plate, so as to prevent the phenomenon of holding car, big wave lines and so on.With sand control ditch device,
Controlled by independent research and development program, eliminate sand groove phenomenon when stop, protect the plate.

 

加工宽度	Working width	40—1300mm
加工厚度	Working thickness	2.5--100mm
加工长度	Working length	640mm
1#砂架砂带速度	No1 abrasive belt speed	19m/s
2#砂架砂带速度	No2 abrasive belt speed	18m/s
送料速度	Feeding speed	6-30m/min
砂带尺寸	Size of the sanding belt	1330x2200mm
电机总功率	Total motor power	64kw
主电机功率	Main motor power	37kw  22kw
工作气压	Working air pressure	0.55mpa
压缩空气消耗量	Consumption of compressed air	0.1m3/min
吸尘风量	Volume of sucked air	9500m3/h
吸尘风速	Speed of sucked air	25-30m/s
外形尺寸	Physical size	2280x2040x2240mm
净重	Net weight	3700kg