Particle board production line

Product Detail

刨花板生产线视频http://v.youku.com/v_show/id_XNzMwMzMxMDI4.html

Particleboard is made from small-diameter wood, branches, wood residues and non-wood agricultural residues via chips preparation, drying, forming and hot press section. Finished boards can be used for furniture, building, packing, vehicle and ship decoration and lamination.

1. CHIPS PREPARATION SECTION

Raw material is reduced into qualified chips by the drum chipper ,then the chips are transported to the chip bin for transitional storage, and then feed to the knife-ring flaker by which the chips are turned to flakes, then the flakes are stored in wet flake bin.

2. DRYING & SIFTING SECTION

The flakes from the wet flake bin are conveyed to the dryer. Qualified core flakes after sifting are stored in core flake bin; oversize flakes are conveyed to miller for milling, and stored in surface flakes bin.

3. GLUE REGULATING & APPLYING SECTION

After scaled, the core and surface flakes are to be effectively and uniformly mixed with required glue independently in their glue mixers respectively.

4. FORMING & HOT-PRESSING SECTION

The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly. After processes of metal remover, pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot press. Rough boards after pressing are pushed to unloader via pallet.

5. COOLING & SIZING SECTION

The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lift.

6. SANDING SECTION

The board are sanded, checked and stored .PLC control is used in mat-forming section.

7. PLC control system

FULL AUTOMATIC CONTROL , SIMENS CONTROL SYSTEM

8. Heating energy center

Heating energy center is the heating supply system from our company design, manufacture for the wood based panel industry, its fuel can be the waste wood, wood skin, saw dust, sanding powder and so on. Produce ,uliple heat carrier like the high temperature thermal oil, steam, hot air and some other high efficiency,energy convervation, enviornment protection heating energy supply equipment.